The SA314 speaker bracket mounts on the left side crash bar of your motorcycle. If you have a light mounted here, the bracket mounting screws may share some or all of the mounting holes.1. Secure the mounting brackets to the SA314 speaker using the provided hardware. Make sure that the brackets are properly oriented before proceeding.
2. Now secure the bracket onto the motorcycle using the supplied mounting hardware as shown below.
3. Connect the speaker to your siren as outlined in your siren installation manual.
Note: Always be sure the siren is mounted so that the wires exit the bottom of the siren. This will position the siren’s drain hole on the bottom for proper drainage. IMPORTANT! Before returning the vehicle to active service, confirm the proper operation of this product, as well as all vehicle components/equipment. BMW Mounting Kit 01-043246-00A includes the following.
This document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.
Source: www.whelen.com
Download: BMW Motorcycles SA314 Siren Speaker Mounting Bracket Installation Guide
No comments:
Post a Comment