BMW Diagnostic Trouble Codes (DTC)

BMW DIAGNOSTIC TROUBLE CODES (DTC)
All 1989-94 BMW vehicles are equipped with a self diagnostic system for the detection of injection faults. When a fault is detected by the system the Electronic Control Unit (ECU) records the code corresponding to the defect in the ECUs memory until either:

Motronic Pedal Fault Codes (CARB) Motronic internal trouble codes DME 1.1, 1.2, 1.3 DME 1.7, 1.7.1 & 3.1 DME1.7.2 DME 3.3 DME 3.3.1 DME MS40 DDE 1 DDE 2 SUPPLEMENTAL RESTRAINT SYSTEM (AIRBAG) CODES SRS 1 SRS 2 SRS 3 SPECIAL NOTE ON E24 & E30 SRS SYSTEMS ELECTRONIC TRANSMISSION CODES EGS 1.XX EGS 1.XX Late Model EGS 2.28 EGS 4.XX EGS 7.XX EGS 9.XX BMW MOTRONIC PEDAL FAULT CODES (Models 1989-94)

All 1989-94 BMW vehicles are equipped with a self diagnostic system for the detection of injection faults. When a fault is detected by the system the Electronic Control Unit (ECU) records the code corresponding to the defect in the ECU's memory until either:
1) The vehicle battery or the ECU is disconnected.
2) The engine is started 60 times with no recurrence of the fault.
3) The ECU memory is cleared using the Bosch KTS300, CARSOFT BMW software or the CS1000 BMW hand scanner.